SOMPEX // TOP 2.0

Product Information "TOP 2.0 - RGBW Battery Bottle Light" You store a champagne bottle as a souvenir of a milestone birthday or a simple beer bottle because it was emptied at a memorable celebration? This old glass can now become a very special light object' with the TOP 2.0 bottle light from Sompex! Its silicone stopper fits with its conical shape in different bottle necks' so you can conjure up a stylish lighting with a unique look in no time. Become your own designer, opt for upcycling in its best form! The dimmable TOP 2.0 runs on battery power and provides up to 40 hours of light both indoors and outdoors. The TOP 2.0 is available in various colors and comes in a pretty round packaging, otherwise only known from noble bottles' a perfect gift. Three different light modes can be selected via the touch sensor in the plastic shade: 1. white light color temperature (selection): In this mode, you can choose between warm white LED 2700K and 3000 K. Quick guide Please read through all 4 steps before starting and familiarize yourself with the process (as waiting 4 seconds/without making any changes can be interpreted as selection). The light must be off 1. press the touch sensor for 5 seconds. - The LED light will turn on and the indicator light will flash blue on the screen. 2. take your finger off the touch sensor and wait 4 seconds. - The indicator light is now solid blue. 3. now you can select the desired light color by briefly pressing the touch sensor. - With each press, the LED changes between 2700K and 3000K. 4. Save the desired light color by pressing the touch sensor for 5 seconds (the selection will also be saved if you do not make any changes for 6 seconds). 2. colored light (selection): In this mode, you choose your color tone from 12 light colors. The following RGB colors are available for selection: Red, Red-Magenta, Magenta, Blue-Magenta, Blue, Cyan-Blue, Cyan, Cyan-Green, Green-Yellow, Yellow, Orange. Quick start guide Please read through all 5 steps before starting and familiarize yourself with the process (as 4 second wait/without changes can be interpreted as selection). The light must be off 1. Press the touch sensor for 5 seconds. - The LED light turns on and the inficator light flashes blue on the screen. 2. press the touch sensor briefly to switch to the green flashing indicator light. 3. take your finger off the touch sensor and wait 4 seconds. - The indicator light is now solid green and the RGB light comes on. 4. Now you can select between the 12 RGB light colors by briefly pressing the touch sensor. - The RGB light color changes with each press of the touch sensor. 5. 5. save the desired light color by pressing the touch sensor for 5 seconds (the selection is also saved if you do not make any changes for 6 seconds). 3. colored light (7-minute automatic): In this mode, all 12 RGB colors are played automatically in a 7-minute color change. The color change is stepless and offers a pleasant and at the same time varied ambience due to the smooth transitions (approx. 30 seconds). Brief instructions Please read through all 4 steps before starting and familiarize yourself with the process (as 4 seconds of waiting/without changes can be interpreted as a selection). The light must be off 1. press the touch sensor for 5 seconds. - The LED light turns on and the inficator light flashes blue on the screen. 2. with two short touches of the touch sensor, you now switch to the red indicator light. - The indicator light now flashes red. 3. 3. take your finger off the touch sensor and wait 4 seconds. - The indicator light now lights up solid red and the 7-minute automatic goes on. 4. 4. wait another 5 seconds and the automatic is automatically saved. - The RGB LED and the indicator light will go off. Dimmer: In 1st & 2nd mode, the brightness of the bottle light can be adjusted by the touch sensor. With Mermory Function: In TOP 2.0 bottle light, the color mode and brightness are saved. So you start with the TOP 2.0 very comfortable with the settings you want.